Precautions for the operation of butterfly laser devices
1. Note: This device will radiate a high-density laser beam when working, and the eye cannot look directly at the end face of the optical fiber, otherwise it may cause damage to the human eye.
2. This device is an electrostatic sensitive device, and the anti-static protection measures of the device should be strictly observed during packaging, transportation and use; Care should also be taken to prevent surge shocks from the power supply, which could cause permanent damage to the device.
3. The optical fiber is easy to break, do not pull the device through the optical fiber; When inserting or pulling the device to the tube head, do not press or pull the sleeve at the end of the tube shell; Devices with connectors should be held at the same time as the fiber optic connector when loading and unloading.
4. If the pins need to be welded, the welding temperature shall not exceed 260°C, and the welding time shall not exceed 10 seconds. Special attention should be paid to the fact that the device must be in an uncharged state during the soldering process, and the soldering iron must be well grounded.
